FEA of Drilling of CFRP Reinforced with Different Percentage of SI3N4 - Yathish M K - Livros - LAP Lambert Academic Publishing - 9786203839647 - 6 de abril de 2021
Caso a capa e o título não sejam correspondentes, considere o título como correto

FEA of Drilling of CFRP Reinforced with Different Percentage of SI3N4

Yathish M K

Preço
NOK 429

Item sob encomenda (no estoque do fornecedor)

Data prevista de entrega 14 - 22 de ago
Adicione à sua lista de desejos do iMusic

FEA of Drilling of CFRP Reinforced with Different Percentage of SI3N4

The current study deals with the drilling of composites based on the taguchi's L27 experimental orthogonal array. Considering the carbon fiber reinforced composite with epoxy resin, silicon nitride (Si3N4) is added to test its influence on the drilling. The experimental studies are carried out on specimens with 0 %, 6 % and 10 % silicon nitride. The process parameters of speed, feed, and diameter of drill bit are varied and results are tabulated in the tables. In general surface roughness, circularity, cylindricity and delamination factor are minimum for a minimum value of thrust force while drilling. Therefore, the thrust force is measured for three different percentage of silicon nitride addition. It is observed that with increased silicon nitride parentage, there is decreased thrust force generated resulting in minimum delamination. In addition, modal analysis and transient structural analysis are carried out to determine the natural frequencies and mode shapes and to investigate the maximum stress and deformation to validate the thrust force and delamination factors.

Mídia Livros     Paperback Book   (Livro de capa flexível e brochura)
Lançado 6 de abril de 2021
ISBN13 9786203839647
Editoras LAP Lambert Academic Publishing
Páginas 80
Dimensões 152 × 229 × 5 mm   ·   137 g
Idioma English  

Mostrar tudo

Mais por Yathish M K

Ver tudo de Yathish M K ( por exemplo Paperback Book )